Add AHCI to Windows XP Installer For Compaq CQ42

Posted: Senin, 07 Oktober 2013 by Budi.Nurcahyo in
0

Material Needed :

  1. Windows XP Installer CD
  2. Nlite Software. Download
  3. Sata Raid Driver. Download  (Pass : techrena)
Steps :
  1. Create a new folder and name it as "WINXP" or any name you like, copy all the content in your xp installation disk (explore cd and press ctrl+A) and paste it in the new folder you just created.
  2. Intsall Nlite and run it. On the first screen just click next.

  3. Now locate/browse to the folder "WINXP" you created.
  4. Next and you will come to "Presets", ignore this and click "Next".
  5. In "Task Selection", choose "Drivers" and "Bootable ISO" by high-lighting them.
     
  6. For INTEL select single driver (for AMD select multiple driver)
     
  7. For intel Browse to the SATA driver folder which you extracted earlier and select either one of the .INF file. 
  8. A screen like below will pop-up, make sure it's "Textmode driver" and select all of them by holding CTRL+A key and choose "OK", the pictures below for intel installation.

    If you arrive at this step for installation its similar for both amd and intel.
     
  9. You shall see something like this. Choose "Next" and you will be prompted.
     
  10. Choose "Yes" to start the process.
     
  11. Let it finish and choose "Next".
     
  12. Finally, you can create your project as ISO image or burn it directly to CD-R under "Mode". choose "Direct Burn". You can put anything for "Label" but not too long. Choose "Burn" and you will be prompted again. You can also choose to create iso to burn using software such as nero.
     
  13. Choose "Yes" to burn it to CD-R. Wait for it to finish and choose "Next"
     
  14. Choose "Finish" to exit nLite.
     
Additional notes :
If your slipstreaming process unsuccessful, you can repeat the pr09ocess but create a new folder and DO NOT USE THE SAME FOLDER. 

0 komentar:

Posting Komentar